1.Building decoration: door and window installation, glass curtain wall sealing, stone joint filling.
2.Bathroom kitchen: waterproof at the edges of the sink, bathtub, sink, and sealed with tiles.
3.Industrial manufacturing: automotive, electronic equipment seals, metal/plastic component bonding.
4.Home repair: water pipe interface leak-proof, roof crack repair, furniture joint reinforcement.
How to use:
1.The substrate is prepared to clean the surface to remove grease, dust and loose particles and ensure dryness. Porous
materials (such as concrete) can be applied first to enhance adhesion.
2.The glue application operation cuts the tip of the hose, loads the glue gun, and squeezes evenly into the gap at a 45° angle.
The filling depth is recommended to be 1/2~2/3 of the gap width.
3.Use a scraper or wet fingers to smooth the colloid to remove excess glue. Avoid touching before curing (the surface drying
time is about 10-30 minutes).
4.Curing time Surface curing: 24 hours (25℃, humidity 50%); Complete curing: 3-7 days (adjusted according to environment).
Things to note:
1.The construction environment temperature is recommended to avoid outdoor operations in rainy and snowy days. Keep
ventilation, speed up curing and reduce odor residue.
2.Safety protection to avoid direct contact with the skin. Wear gloves during construction. If you accidentally get dirty, you can
wipe it with alcohol. Do not allow children or pets to stay close before curing.
3.Material compatibility is not suitable for low-surface energy plastics such as polycarbonate (PC), polyethylene (PE). Oily
surfaces (such as asphalt) need to be tested for adhesion before use.
4.Storage and shelf life Unopened rubber hose is stored in a cool and dry place to avoid high temperature or freezing, and the
shelf life is usually 12 months.
